TMLStore | Providing third party solutions for Terramodel - Streamlining your engineering and surveying production

.

TML Store Logo

Back to Home Page View shopping cart Contact Us

Back to Home Page View shopping cart Contact Us

Back to Home Page View shopping cart Contact Us

.

 Site Navigation

TML Store Home Page Products Page
Search our website
Contact Hamilton Programming


Contact Info

 


View a printer-friendly version of this page

 

BreakVal - Break a pline within a vertical curve.

Description
This command breaks a vertical alignment (a pline in the profile view) at a specified station. Vertical curves are broken into two separate curves that maintain the same geometry. The Break, Clip, and Trim commands in Terramodel will not break plines within a vertical curve. BreakVal can break, trim or insert control points into vertical alignments at any location along the line. Since this command is specific to vertical alignments, if a horizontal alignment is selected it is set as the active alignment and the profile view is redrawn at the station saving several steps if that alignment is not active.

Documentation for this command is available online.

 

 Quick Facts
 Developed by: Ludwig Engineering
 Version: 1.0
 Date added: 18 Jun 2001
 License: $50  
 Minimum requirements: Terramodel versions 9.6 or higher

For more information please call us at (909) 797-9374

Home  | ProductsSearch  |  Contact

 

 

 

.

Copyright ©2000 - 2015 Hamilton Programming